Corporate Events

Riken Technos Corporation announced that at a meeting of the Board of Directors held on July 31, 2025, the Company resolved to adopt an expansion plan for its Mie Factory (Kameyama City, Mie Prefecture) and transfer non-current assets (land and solar power generation facilities) of its Gunma Factory (Ota City, Gunma Prefecture) as per the details given below. The RIKEN TECHNOS GROUP is working to achieve a value-creating balance sheet-one of the growth strategies in the new three-year medium-term business plan "One Vision, New Stage 2027" that started in April 2025-and to improve asset efficiency. Mie Factory Expansion Plan. RIKEN TECHNOS Mie Factory is a key compound manufacturing site of the Group within Japan. The company has decided to acquire adjacent land and expand the factory to enhance its production capacity and improve its efficiency toward the future. The above is in the planning stage and details are subject to change. It also assumes the attainment of various permits and approvals from government agencies, such as development permits. The company will increase the competitiveness of compound business and contribute to the development of the regional economy through this factory expansion. The company will also agilely consider investment necessary for future business growth. Planned construction site, Land adjacent to RIKEN TECHNos Mie Factory (Anodacho, Kameyama City, MIE Prefecture), Facilities to be constructed, Factory and warehouse, Area of land to be acquired, Approximately 30,000 m2, Key products, Resin compounds, Scale of investment, Approximately JPY 9 billion (in the planning stage and subject to change), Start of construction (planned), October 2026, Completion of construction (planned), September 2029. Non-Current Asset Transfer. The company has decided to transfer a portion of the non-current assets of RIKEN TECHNOS Gunma Factory to effectively use management resources and improve asset efficiency. Location, Kamitajimacho, Ota City, Gunma Pre Prefecture, Land (including solar power generation facilities), 57,000 m2, Current state, Factory land (part of Gunma Factory), Transfer price, Approximately JPY 1.89 billion, Capital gain, Approximately JPY 450 million, Date of contract signing, August 27, 2025 (planned). The capital gain is an estimate calculated by deducting the book value, estimated expenses related to the transfer, etc. from the transfer price.

Riken Technos Corporation, Board Meeting, Jul 31, 2025. Agenda: To consider and resolve the matters concerning the acquisition of treasury shares pursuant to the provisions of Article 156 of the Companies Act, as applied by replacing the relevant terms pursuant to the provisions of Article 165, paragraph of the same Act.

Riken Technos Corporation (TSE:4220) announces a share repurchase program. Under the program, the company will repurchase 1,500,000 shares, representing 2.93% of the outstanding shares for ¥1,800 million. The purpose of the program is to exercise agile management of capital policy corresponding to any changes of business environment and improve capital efficiency and enhance shareholder returns. The shares repurchased will be cancelled. All the acquisition funds will be sourced from own funds. The program will run until October 31, 2025. As of June 30, 2025, the company had 51,274,821 issued shares (excluding treasury stock) and 808,400 shares in treasury.

The Board of Directors of Riken Technos Corporation has authorized a buyback plan on July 31, 2025.

Riken Technos Corporation announced that they will report Q1, 2026 results on Jul 31, 2025

From April 1, 2025 to June 19, 2025, the company has repurchased 740,400 shares, representing 1.45% for ¥782.57 million. With this, the company has completed the repurchase of 2,000,000 shares, representing 3.84% for ¥2,174.43 million under the buyback announced on February 25, 2025.

The company closed its plan on June 19, 2025.

Riken Technos Corporation provided dividend guidance for fiscal year ending March 31, 2026. For the year end, the company expects dividend of ¥21.00 per share against ¥27 per share a year ago.

Riken Technos Corporation provided dividend guidance for second quarter. For the second quarter, the company expects dividend of JPY 20.00 per share.

Riken Technos Corporation provided Consolidated earnings guidance for the Six months ending September 30, 2025 and Fiscal year ending March 31, 2025. For the six months, the company expects Net sales to be JPY 64,500 million. Operating profit expects to be JPY 4,700 million. Profit attributable to owners of parent to be JPY 2,600 million. Basic earnings per share to be JPY 50.80 per share. For the year ended, the company expects Net sales to be JPY 134,000 million. Operating profit expects to be JPY 10,500 million. Profit attributable to owners of parent to be JPY 5,800 million. Basic earnings per share to be JPY 113.33 per share.

Riken Technos Corporation, Annual General Meeting, Jun 20, 2025.

From February 25, 2025 to March 31, 2025, the company has repurchased 1,259,600 shares, representing 2.39% for ¥1,391.86 million. With this, the company has completed the repurchase of 1,259,600 shares, representing 2.39% for ¥1,391.86 million under the buyback announced on February 25, 2025.

Riken Technos Corporation, Board Meeting, Mar 24, 2025. Agenda: To discuss One Vision, New Stage 2027 New Three-year Medium-term Business Plan Fiscal Year 2025 (Ending March 2026) ­ Fiscal Year 2027 (Ending March 2028) and Revision of Long-term Vision/Materiality Topics.

Riken Technos Corporation announced that they will report fiscal year 2025 results on Apr 30, 2025

The Board of Directors of Riken Technos Corporation has authorized a buyback plan on February 25, 2025.

Riken Technos Corporation (TSE:4220) announces a share repurchase program. Under the program, the company will repurchase 2,000,000 shares, representing 3.8% of the outstanding shares for ¥2,400 million. The purpose of the program is to implement a flexible capital policy in response to changes in the business environment, enhance capital efficiency and improve shareholder returns. The shares repurchased will be cancelled. All the acquisition funds will be sourced from own funds. The program will run until June 30, 2025. As of January 31, 2025, the company had 52,608,452 issued shares (excluding treasury stock) and 666,567 shares in treasury.

Riken Technos Corporation, Board Meeting, Feb 25, 2025. Agenda: To introduce the Employee Stock Benefit Trust an incentive plan that provides employees with shares of the Company's stock; and to consider other business matters.

Riken Technos Corporation announced organizational changes. In the Sales & Marketing Division, the Company will implement organizational changes aimed at improving the profitability of the RIKEN TECHNOS GROUP as a whole. This will be achieved by enhancing agility and further developing and strengthening global business operations, transitioning from a structure of five business units that administer market-specific strategies to a streamlined structure of four business units. A new Compound Business Unit will be established, integrating the Electronics Business Unit and the Daily Life & Housing Environment Business Unit to manage compounds that are not related to automobiles. The new organization names and their corresponding current organization names are as follows: the Transportation Business Unit will remain unchanged; the Compound Business Unit will replace the Electronics Business Unit and the Daily Life & Housing Environment Business Unit, reflecting the integration of these two units; the Film Business Unit will also remain unchanged; and the Food Packaging Business Unit will continue as is. In the Manufacturing Division, the Company aims to further strengthen its manufacturing capabilities by establishing the Manufacturing Division, which will integrate departments relevant to manufacturing. The Compound Division and the Film Division will be created as product-specific organizations under the Manufacturing Division. Additionally, the Company will set up the Compound R&D Department, the Compound Production Department, and the Compound Quality Control Department under the Compound Division, as well as the Film Processing R&D Department, the Film Production Department, and the Film Quality Control Department under the Film Division. This structure will facilitate personnel exchanges and eliminate organizational barriers, thereby improving development efficiency and accelerating the transition from development to mass production. The Manufacturing Division will also include the Procurement Division and the Purchasing Department, which are essential for ensuring stable procurement of materials and raw materials, building relationships with suppliers, and gathering information on materials. Other departments relevant to manufacturing will include the Engineering Department, the R&D Center, the Saitama Factory, the Mie Factory, the Gunma Factory, the Nagoya Factory, the Logistics Department, the Intellectual Property Department, the Material Characterization & Analysis Center, and the Core Technology R&D Department, which focuses on developing new products with target development periods of three to five years. Concurrently, the Company will abolish the Manufacturing Quality Strategic Committee and the Technical Strategic Committee, establishing the Manufacturing Review Committee to review and approve proposals for new items developed by the Compound Division, the Film Division, and the Core Technology R&D Department. The Procurement Division, Technical Division, old Manufacturing Division, and Quality Assurance Division will undergo reorganization due to the establishment of the Manufacturing Division. The TPM Promotion Department will be dissolved, with departments under the Manufacturing Division taking responsibility for operations related to TPM. The Quality Assurance Department and the Responsible Care Department will be integrated to form the Integrated Management System Department, which will report directly to the President & CEO. Lastly, the Company will rename the Start-up Office for New Business Development to the Promotion Office for Startup and New Business Creation, aiming to more specifically promote the creation of new core businesses and enhance the development of elemental technologies, considering future changes in social challenges.

As of April 1, 2025, there have been changes in Executive Officers and organizational changes of Riken Technos Corporation. In the category of changes in Executive Officers, Junji Irie has been appointed as the Representative Director and Executive Vice President, taking on the new responsibilities of Senior General Manager of the Administrative Division, while his current position remains as Senior Managing Executive Officer, which has not changed. Gakuyuki Kajiyama has been designated as the Senior Managing Executive Officer, with new responsibilities as Senior General Manager of Sales & Marketing Division, while his current position as Managing Executive Officer remains unchanged. Tomozo Ogawa has been promoted to Managing Executive Officer, now serving as Senior General Manager of Manufacturing Division and Senior General Manager of Procurement Division, with his current responsibilities as Senior Executive Officer unchanged. Michihisa Tasaka continues as Senior Executive Officer, now taking on the role of General Manager of Promotion Office for Startup and New Business Creation, while his current responsibilities as General Manager of Start-up Office for New Business Development remain unchanged. Fumitoshi Nakamura has been appointed as Executive Officer, with new responsibilities as Deputy Senior General Manager of Sales & Marketing Division, General Manager of Transportation Business Unit, and General Manager of Nagoya Sales Office, while his current position as Deputy Senior General Manager of Sales & Marketing Division and General Manager of Transportation Business Unit remains unchanged. Akihiro Tamura has been named Executive Officer, now serving as Senior General Manager of Film Division and General Manager of Film Quality Control Department, with his current responsibilities as Senior General Manager of Quality Assurance Division unchanged. Lastly, Hiroaki Wakayama has been appointed as Executive Officer, taking on the new responsibilities of Senior General Manager of Compound Division and General Manager of R&D Center, while his current position as Deputy Senior General Manager of Technical Division, General Manager of R&D Center, and General Manager of Material R&D Department No.2 remains unchanged.

Riken Technos Corporation, Board Meeting, Jan 27, 2025. Agenda: To consider and approve the changes of Executive Officers and organizational changes.

Riken Technos Corporation announced that they will report Q3, 2025 results on Jan 31, 2025

Riken Technos Corporation, Board Meeting, Jul 31, 2024.

Riken Technos Corporation, ¥ 23.0, Cash Dividend, Mar-28-2025

From October 1, 2024 to October 25, 2024, the company has repurchased 653,300 shares, representing 1.19% for ¥689.5 million. With this, the company has completed the repurchase of 2,500,000 shares, representing 4.54% for ¥2,427.98 million under the buyback announced on July 31, 2024.

The company closed its plan on October 25, 2024.

From July 31, 2024 to September 30, 2024, the company has repurchased 1,846,700 shares, representing 3.36% for ¥1,738.48 million. With this, the company has completed the repurchase of 1,846,700 shares, representing 3.36% for ¥1,738.48 million under the buyback announced on July 31, 2024.

Riken Technos Corporation announced that they will report Q2, 2025 results on Oct 31, 2024